On this page
- What makes an indicator good for intraday trading?
- The 8 best indicators for intraday trading
- 1. Exponential moving average (EMA)
- 2. VWAP (volume-weighted average price)
- 3. RSI (Relative Strength Index)
- 4. MACD
- 5. ATR (Average True Range)
- 6. Bollinger Bands
- 7. Pivot points
- 8. Supertrend
- Best indicator for gold intraday trading
- Best timeframes for intraday indicators
- Best intraday trading hours in IST
- 3 indicator combinations for intraday trading
- Combination 1: EMA + RSI (trend plus momentum)
- Combination 2: VWAP + MACD (levels plus momentum)
- Combination 3: Bollinger Bands + ATR (volatility breakout)
- Built-in vs custom indicators on MT5
- Common mistakes with intraday indicators
- So, which is the best indicator for intraday trading?
- Practise intraday indicators with Xellion
"Which is the best indicator for intraday trading?" is one of the most common questions Indian traders ask. The honest answer is that no single indicator works on its own. The best intraday indicators are the ones that each do a different job (trend, momentum, volatility, levels) and that you understand well enough to read in real time.
This guide looks at eight indicators that intraday forex and gold traders use most, the settings that suit intraday charts, which ones are built into MetaTrader 5, and three practical combinations. All prices in this article are example prices. For the bigger picture on day trading, read our intraday trading in forex guide.
What makes an indicator good for intraday trading?
Intraday traders open and close trades within the same day, usually on M15 to H1 charts. That changes what you need from an indicator:
- It must react fast enough for moves that last hours, not weeks.
- It must not flood you with signals on lower timeframes.
- It should do one clear job: show trend, momentum, volatility or key levels.
- It should work on the platforms you use, including mobile and web if you follow trades away from your desk.
The four jobs, and the indicators that do them:
| Job | Question it answers | Indicators |
|---|---|---|
| Trend | Which direction should I trade? | Moving averages (EMA), Supertrend, ADX |
| Momentum | Is the move strong or fading? | RSI, MACD, Stochastic |
| Volatility | How far does price usually move? | ATR, Bollinger Bands |
| Levels | Where might price react? | VWAP, pivot points |
A good intraday setup uses one indicator from two or three of these groups, not five indicators from the same group.
The 8 best indicators for intraday trading
| # | Indicator | Type | Common intraday settings | Built into MT5? |
|---|---|---|---|---|
| 1 | Exponential moving average (EMA) | Trend | 9/21 EMA, 50 EMA, 200 EMA | Yes |
| 2 | VWAP | Levels / trend | Session (daily) reset | No (custom) |
| 3 | RSI | Momentum | 14 (or 9 for faster signals) | Yes |
| 4 | MACD | Momentum / trend | 12, 26, 9 | Yes |
| 5 | ATR | Volatility | 14 | Yes |
| 6 | Bollinger Bands | Volatility | 20, 2 | Yes |
| 7 | Pivot points | Levels | Daily classic pivots | No (custom) |
| 8 | Supertrend | Trend | 10, 3 | No (custom) |
1. Exponential moving average (EMA)
The EMA is the simplest trend filter. It gives more weight to recent prices, so it reacts faster than a simple moving average, which suits intraday charts.
- How intraday traders use it: trade only in the direction of the 50 or 200 EMA on H1; use a fast pair such as the 9 and 21 EMA on M15 for entries on pullbacks or crossovers.
- Strength: clear, objective trend direction.
- Weakness: lags at turning points and whipsaws in ranges.
Read moving average trading for crossover and pullback rules.
2. VWAP (volume-weighted average price)
VWAP shows the average price weighted by volume since the session began. Above VWAP, buyers are in control for the day; below it, sellers are. In forex and CFDs, VWAP uses tick volume, because there is no central exchange volume.
- How intraday traders use it: buy pullbacks to VWAP when price is above it, sell rallies to VWAP when price is below it.
- Strength: a single, intraday-specific reference level that resets each day.
- Weakness: not built into MT5.
See the VWAP indicator guide.
3. RSI (Relative Strength Index)
RSI measures momentum on a 0–100 scale. Intraday traders use it in three ways: overbought/oversold readings (70/30) in ranges, the 50 line as a momentum filter in trends, and divergence at session highs and lows.
- Settings: 14 is standard; 9 reacts faster on M15.
- Strength: simple and available everywhere.
- Weakness: stays overbought for long periods in strong trends.
Read our RSI indicator guide and RSI divergence guide.
4. MACD
MACD (12, 26, 9) shows the relationship between two EMAs, with a signal line and histogram. It works as both a trend and momentum tool.
- How intraday traders use it: histogram crossing zero in the trend direction; MACD line crossing the signal line after a pullback.
- Strength: combines trend and momentum in one panel.
- Weakness: slower than RSI; signals arrive late on fast moves.
See the MACD indicator guide.
5. ATR (Average True Range)
ATR does not show direction. It shows how much price typically moves per candle. For intraday traders, that is very practical.
- How intraday traders use it: set realistic targets (if gold's H1 ATR is $9, a $40 target within two hours is ambitious); place invalidation levels outside normal noise; avoid trading when ATR is unusually low.
- Strength: keeps expectations realistic.
- Weakness: no signals on its own.
Read the ATR indicator guide.
6. Bollinger Bands
Bollinger Bands (20, 2) place bands two standard deviations around a 20-period moving average.
- How intraday traders use it: a "squeeze" (narrow bands) often comes before a breakout, which is common before the London open; in ranges, price touching the outer band and closing back inside can signal a return to the middle band.
- Strength: shows volatility and relative highs/lows in one tool.
- Weakness: a band touch is not a signal by itself in a trend.
See the Bollinger Bands guide.
7. Pivot points
Pivot points are levels calculated from the previous day's high, low and close: a central pivot (P), resistance levels (R1, R2, R3) and support levels (S1, S2, S3).
- How intraday traders use it: above P is a bullish bias, below P a bearish bias; R1/S1 act as first targets or reaction points.
- Strength: every trader watching the same pair sees similar levels.
- Weakness: not built into MT5; you can calculate them by hand or use a custom indicator.
Read the pivot points trading guide.
8. Supertrend
Supertrend is an ATR-based line that sits below price in an uptrend and above it in a downtrend. It is very popular in India for intraday trading.
- Settings: 10, 3 is standard; some intraday traders use 7, 2 (more signals, more noise).
- Strength: one clear line that also works as a trailing exit.
- Weakness: whipsaws in ranges; not built into MT5.
See the Supertrend indicator guide.
Best indicator for gold intraday trading
Gold (XAU/USD) moves more than most forex pairs in a typical day and reacts strongly to US data. Indicators that adapt to volatility tend to suit it:
| Indicator | Why it suits gold intraday |
|---|---|
| ATR | Gold's range changes a lot between quiet and news days; ATR keeps targets realistic |
| EMA (50 and 200 on H1) | Gold often trends cleanly during the London–New York overlap |
| VWAP | Good reference for the day's fair price around US data |
| RSI 14 | Divergence at session highs/lows; 50-line filter in trends |
| Supertrend (10, 3 or higher multiplier) | Volatility-based trailing exit |
Many gold traders also watch session levels: the Asian high and low, the previous day's high and low and round numbers such as $4,000. See our gold trading strategy guide.
Best timeframes for intraday indicators
| Chart | Role in intraday trading |
|---|---|
| H4 | Daily bias: overall trend direction |
| H1 | Main trend and key levels for the session |
| M15 | Entry timing and confirmation |
| M5 and lower | Very noisy; indicators give many false signals |
Scalping is not permitted at Xellion, so build your intraday plan on M15 and higher. A simple top-down approach: H1 for direction, M15 for entries.
Best intraday trading hours in IST
Indicators work better when the market is moving. Approximate winter times:
| Session | Time (IST) | What to expect |
|---|---|---|
| Asian | About 5:30 am – 12:30 pm | Quieter ranges on majors; gold can drift |
| London open | About 1:30 pm | Volatility jumps; range breakouts |
| London–New York overlap | About 6:30 pm – 9:30 pm | Most active hours for EUR/USD, GBP/USD and gold |
| US data releases | Often about 7:00 pm | Fast spikes; indicators can flip suddenly |
Times move by about an hour when Europe and the US change their clocks. See forex market timings in India and the economic calendar guide.
3 indicator combinations for intraday trading
Combining indicators that do different jobs gives clearer signals than stacking similar ones.
Combination 1: EMA + RSI (trend plus momentum)
Indicators: 50 EMA on H1, 9/21 EMA and RSI 14 on M15.
Rules for a buy:
- Price is above the 50 EMA on H1.
- On M15, price pulls back to the 21 EMA.
- RSI dips towards 40–50 but stays above 40 (momentum still bullish).
- A bullish candle closes back above the 9 EMA. Enter on the close.
- Invalidation below the pullback low; target at the session high or R1 pivot.
Example: EUR/USD (M15). All prices are example prices.
| Item | Level | Note |
|---|---|---|
| H1 bias | Above 50 EMA (1.1618) | Uptrend |
| Pullback low | 1.1634 | Touches the M15 21 EMA; RSI 44 |
| Entry | 1.1642 | Bullish candle closes above the 9 EMA |
| Invalidation level | 1.1629 | Below the pullback low |
| Target | 1.1668 | London session high |
Combination 2: VWAP + MACD (levels plus momentum)
Indicators: session VWAP (custom) and MACD 12, 26, 9 on M15.
Rules for a sell:
- Price has been below VWAP for most of the session.
- Price rallies back to VWAP.
- MACD histogram turns from positive back to negative near VWAP.
- Enter on the close of the candle where the histogram turns negative.
- Invalidation above the rally high; target at the session low.
Example: gold (M15). All prices are example prices.
| Item | Level | Note |
|---|---|---|
| Session VWAP | $4,038 | Price below for most of the session |
| Rally high | $4,040 | Tests VWAP from below |
| Entry | $4,033 | MACD histogram turns negative |
| Invalidation level | $4,044 | Above the rally high |
| Target | $4,015 | Session low |
On most MT5 accounts, 1 lot of gold is 100 ounces, so at 0.01 lot each $1 move is worth about $1. Check the contract specification in your platform.
Combination 3: Bollinger Bands + ATR (volatility breakout)
Indicators: Bollinger Bands 20, 2 and ATR 14 on M15.
Rules:
- Before the London open, the bands narrow (squeeze) and ATR falls to a low reading for the day.
- Mark the Asian high and low.
- Wait for a candle to close outside the bands and beyond the Asian range.
- Enter in the breakout direction on the close.
- Use 1.5 × ATR from entry as a reference for invalidation, and the previous day's high or low as the target.
Example: GBP/USD (M15). All prices are example prices.
- Asian range: 1.3172–1.3194. M15 ATR falls to 6 pips; bands squeeze.
- At about 1:45 pm IST, an M15 candle closes at 1.3203, above the upper band and the Asian high.
- Invalidation: 1.5 × 6 = 9 pips below entry, about 1.3194, back inside the range.
- Target: previous day's high at 1.3238.
Be aware that some breakouts fail and reverse; see our liquidity sweep guide and breakout trading strategy.
Built-in vs custom indicators on MT5
Five of the eight indicators above are standard in MetaTrader 5: moving averages, RSI, MACD, ATR and Bollinger Bands. You find them under Insert → Indicators (Trend, Oscillators). They are also in the built-in list of the MT5 mobile apps.
VWAP, pivot points and Supertrend are not standard MT5 indicators. To use them on MT5:
- They may need adding from MQL5. Download a custom indicator from a source you trust (for example the MQL5 community), then copy it to File → Open Data Folder → MQL5 → Indicators on the MT5 desktop terminal and refresh the Navigator.
- They may not show on MT5 mobile or web, which use their built-in indicator lists. A common workaround is to analyse on desktop and follow positions on mobile or web.
- Versions differ, so two custom VWAP or Supertrend files may draw slightly different lines.
Custom indicator files are written by third parties, not by MetaQuotes or Xellion. New to the platform? Follow our MT5 download, login and setup guide.
Common mistakes with intraday indicators
| Mistake | What happens | Better approach |
|---|---|---|
| Using five indicators at once | Conflicting signals, no decisions | Use two or three, each with a different job |
| Stacking similar indicators (RSI + Stochastic + CCI) | Same information three times | Pair momentum with trend or levels |
| Trading every crossover | Whipsaws in ranges | Filter with the H1 trend |
| Ignoring price action | Late or poor entries | Combine indicators with candles and levels; see our candlestick patterns guide |
| Changing settings daily | Curve-fitting | Test one setting over a long demo sample |
| Trading quiet hours | Indicators flat, small moves | Focus on London and New York sessions |
| Trading straight into news | Indicators flip and reverse | Check the calendar first |
So, which is the best indicator for intraday trading?
If you want one starting point, a trend filter (50 EMA on H1) plus one momentum indicator (RSI 14 on M15) is simple, built into every platform and teaches you how trend and momentum interact. Add ATR to keep targets realistic. Once you are comfortable, try VWAP or Supertrend as custom tools on MT5 desktop.
The "best" indicator is the one you understand, test on a demo account and apply the same way every time.
Practise intraday indicators with Xellion
Open Xellion WebTrader in your browser and start with a free demo account to test these indicator combinations on EUR/USD, GBP/USD and gold during the London and New York sessions, with no download needed. For custom indicators such as VWAP, pivot points or Supertrend, use MetaTrader 5 on desktop. You can follow your trades on the Xellion app for iOS and Android.
When you are ready to go live, UPI deposits are instant, with a minimum of $50.
- Open a free demo account
- Intraday trading in forex
- Related reading: VWAP indicator guide, RSI indicator guide, MACD indicator guide
Which is the best indicator for intraday trading?
No single indicator works alone. A common starting combination is a 50 EMA on H1 for trend and RSI 14 on M15 for momentum, with ATR to keep targets realistic.
How many indicators should I use for intraday trading?
Two or three is enough, each doing a different job: one for trend, one for momentum or volatility, and optionally one for key levels such as VWAP or pivots.
What is the best indicator for gold intraday trading?
Many gold traders combine ATR (for gold's changing volatility) with a trend tool such as the 50 and 200 EMA on H1, plus RSI or VWAP for timing.
Is VWAP available on MT5?
Not as a standard indicator. VWAP is a custom indicator on MT5: it may need adding from MQL5 to the desktop terminal and may not show on MT5 mobile or web.
Which timeframe is best for intraday indicators?
Most intraday traders use H1 for direction and M15 for entries. Very low timeframes produce many false signals.
Is Supertrend good for intraday trading?
Supertrend works well in trending sessions and as a trailing exit, but it whipsaws in ranges. It is a custom indicator on MT5, not a standard one.
What is the best time to trade intraday from India?
The London open (around 1:30 pm IST in winter) and the London–New York overlap (around 6:30–9:30 pm IST in winter) are usually the most active hours.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.


