On this page
- What is VWAP?
- The VWAP formula
- Worked example
- How VWAP works in forex: tick volume
- How to add the VWAP indicator on MT5
- How to read the VWAP indicator
- Daily, weekly and monthly VWAP
- VWAP bands
- Anchored VWAP
- VWAP trading strategy 1: Trend pullback to VWAP
- Example: EUR/USD (M15)
- VWAP trading strategy 2: VWAP reclaim or rejection
- VWAP trading strategy 3: Anchored VWAP from a news candle
- Example: gold (M15)
- VWAP limitations and common mistakes
- Using VWAP with other tools
- Practise the VWAP indicator with Xellion
The VWAP indicator is one of the most watched lines on intraday charts. VWAP stands for volume weighted average price: the average price of the trading day, weighted by how much trading happened at each price. Many traders use it as a "fair value" line for the day. When price is above VWAP, buyers have had the upper hand on average; when price is below it, sellers have.
VWAP is very popular with Indian stock and index traders, but it works a little differently on forex and gold CFDs, because those markets have no single exchange reporting total volume. This guide explains what VWAP is, the VWAP formula with a worked example, how it uses tick volume on MT5, anchored VWAP and VWAP bands, and three common VWAP trading strategy setups with example prices. One honest point first: VWAP is a reference line, not a signal on its own. Price crosses it many times on a choppy day, and it works best with a clear plan and a defined stop-loss level.
What is VWAP?
VWAP is a running average of price that gives more weight to periods with more trading activity. It starts fresh at the beginning of each trading session and updates with every new candle.
| Feature | VWAP | Simple moving average |
|---|---|---|
| What it averages | Price weighted by volume | Price only |
| Starting point | Start of the session (resets daily) | Last N candles (rolling) |
| Main use | Intraday fair value and bias | Trend direction on any timeframe |
| Behaviour late in the day | Moves slowly – many candles already included | Moves at a steady pace |
| Best timeframes | M5 to H1, within one day | Any |
Because VWAP includes every candle since the session began, it becomes more stable as the day goes on. Early in the session it moves quickly; by the New York afternoon it barely moves. Our moving average trading guide explains the rolling averages that VWAP is often compared with.
The VWAP formula
The VWAP formula has three steps:
- Typical price for each candle = (High + Low + Close) ÷ 3.
- Price × volume for each candle = typical price × that candle's volume.
- VWAP = cumulative (price × volume) ÷ cumulative volume, since the start of the session.
Worked example
All figures are example figures for the first three M15 candles of a session.
| Candle | Typical price | Volume | Price × volume | Cumulative P×V | Cumulative volume | VWAP |
|---|---|---|---|---|---|---|
| 1 | 1.1600 | 1,000 | 1,160.0 | 1,160.0 | 1,000 | 1.16000 |
| 2 | 1.1610 | 1,500 | 1,741.5 | 2,901.5 | 2,500 | 1.16060 |
| 3 | 1.1590 | 500 | 579.5 | 3,481.0 | 3,000 | 1.16033 |
Notice that candle 2, with the most volume, pulls VWAP towards its price more than candle 3 does. A simple average of the three typical prices would be 1.16000; VWAP is 1.16033 because more trading happened higher up.
How VWAP works in forex: tick volume
On a stock exchange, VWAP uses the real number of shares traded. Spot forex and CFDs on forex and gold are traded across many venues, so there is no single, complete volume figure.
MetaTrader 5 solves this with tick volume: the number of price changes (ticks) in each candle. When the market is busy, price updates more often, so tick volume rises. Tick volume usually rises and falls with overall market activity – it is high in the London–New York overlap and low in the late US session – which is why many traders find VWAP on forex charts still gives a useful picture. But it is a proxy, not exact traded volume, and different platforms can show slightly different VWAP values.
Two practical points for forex and gold traders in India:
- The "day" depends on server time. VWAP resets at the start of each trading day on the platform's server clock, not at midnight IST. Check where your VWAP starts before you rely on it.
- Session VWAPs can help. Some traders anchor VWAP to the London open (about 1:30 pm IST in winter) or New York open, because those are the busiest periods. See forex market timings in IST.
How to add the VWAP indicator on MT5
Depending on your MT5 build, VWAP may not appear in the default list of indicators. Traders usually add one in a few steps:
- Open MT5 and log in (server Xellion-Live). Our MT5 download, login and setup guide covers installation and login on Android, iPhone, PC and web.
- Find a VWAP indicator in the MetaTrader Market or the MQL5 code base and install it. Check the description and reviews before installing anything.
- In the Navigator panel, open Indicators and drag VWAP onto the chart.
- Choose the settings: the reset period (daily is standard), the price type (typical price is standard) and, if available, standard-deviation bands.
- Save the chart as a template so VWAP loads on every new chart.
Use an M5, M15 or M30 chart for daily VWAP. On H4 or daily charts, a daily-reset VWAP has too few candles to be useful; anchored VWAP is better there.
How to read the VWAP indicator
- Price above VWAP – on average, today's buyers are in profit. Many traders lean towards buys or stay out of sells.
- Price below VWAP – on average, today's sellers are in control. Many traders lean towards sells.
- Price crossing VWAP again and again – a balanced, range-bound day. VWAP signals are weak on these days.
- Price far from VWAP – the move is stretched. Price often returns towards VWAP later in the session, though not always.
- VWAP slope – a rising VWAP shows steady buying through the day; a flat VWAP shows balance.
Daily, weekly and monthly VWAP
Many VWAP indicators let you choose the reset period. Daily VWAP is the standard for intraday charts. Weekly VWAP resets at the start of each trading week and is useful on H1 and H4 charts, where it shows whether the average buyer or seller this week is in profit. Monthly VWAP is slower still and is often watched alongside major support and resistance zones. When daily, weekly and monthly VWAP sit close together, that price area tends to attract attention from many traders at once.
VWAP bands
Many VWAP indicators can draw bands at one, two and three standard deviations above and below VWAP, similar to Bollinger Bands around a moving average.
| Band | What traders often watch |
|---|---|
| VWAP itself | Fair value; first area for pullbacks in a trend |
| ±1 standard deviation | Normal range for the day |
| ±2 standard deviations | Stretched; momentum may slow |
| ±3 standard deviations | Very stretched; often near the day's extreme |
On a trending day, price can "ride" the first or second band for hours. On a range day, price often moves between the bands and VWAP. Bands describe how far price has moved, not where it must turn.
Anchored VWAP
Anchored VWAP starts the calculation from a point you choose instead of the start of the day. Common anchors are:
- A major swing high or swing low.
- The candle of a big news release, such as NFP or US CPI.
- The start of the week or month.
- The breakout candle of a range or chart pattern.
Anchored VWAP shows the average price paid by everyone who traded since that event. If price is above an anchored VWAP from a swing low, the average buyer since that low is in profit. Anchored VWAP works on any timeframe, so swing traders use it on H4 and daily charts too.
VWAP trading strategy 1: Trend pullback to VWAP
This is the most common VWAP strategy.
- Identify the bias: price has stayed above VWAP since the session began, and VWAP is rising.
- Wait for a pullback to VWAP (or just below it).
- Look for a bullish rejection candle at VWAP, such as a pin bar or bullish engulfing. Our candlestick patterns guide shows these.
- Buy on the close of that candle. Place the stop-loss level below the pullback low.
- Target the day's high or the +1 band.
Example: EUR/USD (M15)
All prices are example prices.
- From the London open, EUR/USD trades above VWAP and climbs to 1.1630.
- At 4:00 pm IST, price pulls back to VWAP at 1.1587.
- A bullish pin bar closes at 1.1594.
| Item | Level | Calculation |
|---|---|---|
| Entry | 1.1594 | Close of the pin bar |
| Stop-loss level | 1.1576 | Below the pullback low and VWAP |
| Planned loss | 18 pips | 1.1594 – 1.1576 |
| Target | 1.1630 | Day's high |
| Distance to target | 36 pips | About 2:1 |
VWAP trading strategy 2: VWAP reclaim or rejection
When price has been on one side of VWAP and then crosses it with strength, the bias may be changing.
- Reclaim: price has been below VWAP, then closes above it with a strong candle, then holds on a retest. Some traders buy the retest.
- Rejection: price rallies up to VWAP from below, fails, and prints a bearish rejection candle. Some traders sell, with the stop-loss level above the rejection high.
This works best when it lines up with a support and resistance level or a round number.
VWAP trading strategy 3: Anchored VWAP from a news candle
Example: gold (M15)
- At 7:00 pm IST, US data is released and gold drops from $4,080 to $4,032.
- A trader anchors VWAP to the news candle. By 9:00 pm IST, anchored VWAP sits at $4,062.
- Gold rallies back to $4,061, prints a bearish engulfing candle and closes at $4,058.
| Item | Level | Calculation |
|---|---|---|
| Entry | $4,058 | Close of the engulfing candle |
| Stop-loss level | $4,071 | Above the rejection high |
| Planned loss per ounce | $13 | $4,071 – $4,058 |
| Target | $4,032 | Post-news low |
| Distance to target | $26 | About 2:1 |
On most MT5 accounts, 1 lot of gold is 100 ounces, so at 0.01 lot each $1 move is worth about $1. A $13 stop at 0.01 lot is a planned loss of about $13, before costs. Follow live prices on our gold price today page.
VWAP limitations and common mistakes
| Mistake | What happens | Better approach |
|---|---|---|
| Treating every VWAP cross as a signal | Many losing trades on range days | Use VWAP for bias; wait for a setup |
| Using daily VWAP on H4 or daily charts | Too few candles; the line jumps | Use anchored VWAP on higher timeframes |
| Forgetting it is tick volume in forex | Expecting exchange-grade accuracy | Treat VWAP as a guide, not exact fair value |
| Fading a strong trend at the bands | Price keeps riding the band | Check trend strength first |
| Ignoring the reset time | VWAP starts at an unexpected hour | Check the server-time reset |
Other limitations to keep in mind:
- VWAP lags. It is built from past prices and cannot predict news.
- Early-session noise. In the first hour after the reset, VWAP moves quickly and is less meaningful.
- News spikes. NFP or CPI releases, usually at 7:00 pm IST in winter, can push price through VWAP and the bands in seconds. Check the economic calendar.
Using VWAP with other tools
- Momentum – an RSI above 50 while price holds above VWAP supports a buy bias.
- Pivot points – daily pivot points and VWAP together create a map of intraday levels.
- Price action – rejection candles at VWAP; see the price action trading guide.
- Intraday plan – VWAP fits naturally into an intraday trading routine built around the London and New York sessions.
For the wider picture, see our guide to technical analysis in forex.
Practise the VWAP indicator with Xellion
You can add VWAP, set the reset period and test anchored VWAP on MetaTrader 5 (server Xellion-Live), and follow your positions on the Xellion app for iOS and Android or WebTrader. A free demo account gives you live prices with no real money, so you can test VWAP pullbacks and rejections across different sessions before you trade live.
When you are ready to go live:
- Choose an account on the accounts page: Standard (minimum first deposit $50, spreads from 0.9), Raw (minimum $250, spreads from 0.1) or Zero (minimum $750, spreads from 0.0).
- Fund it on the funding page: UPI deposits are instant, from $50.
- Size from the stop-loss level. Leverage goes up to 1:2000, which lowers the margin needed, but your lot size decides what each pip is worth. See the lot size and pip calculator guide.
Note that scalping is not permitted on Xellion accounts, so plan VWAP trades with room to develop rather than very short holding times.
CFDs are complex instruments and carry a high risk of losing money. Not investment advice.
What is VWAP in trading?
VWAP stands for volume weighted average price. It is the average price of the session, weighted by volume, and it resets at the start of each trading day. Many traders use it as an intraday fair-value line.
How is VWAP calculated?
For each candle, multiply the typical price ((high + low + close) ÷ 3) by volume. Add these up since the session began and divide by the total volume over the same period.
Does the VWAP indicator work in forex?
Yes, but it uses tick volume – the number of price changes – because spot forex has no single exchange volume. Tick volume is a proxy, so treat VWAP on forex charts as a guide.
What is the best timeframe for VWAP?
Daily VWAP is most useful on intraday charts such as M5, M15 and M30. On H4 and daily charts, anchored VWAP from a swing point or news event is more useful.
What is anchored VWAP?
Anchored VWAP starts the calculation from a point you choose, such as a swing low, a breakout candle or a news release, instead of the start of the day.
Is price above VWAP bullish?
Price above VWAP shows that buyers have had the upper hand on average during the session. Many traders lean towards buys, but it is a bias, not a guarantee.
Can I practise a VWAP trading strategy for free?
Yes. A free demo account on MT5 lets you add a VWAP indicator and test pullback and rejection setups with live prices and no real money.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.



