On this page
- What is a pivot point?
- Which period's data do you use?
- A simple daily routine for Indian traders
- Pivot point formulas
- Standard (floor) pivot points
- Fibonacci pivot point
- Camarilla pivot point
- Woodie pivot
- Which type should you use?
- Pivot point calculator: worked example on EUR/USD
- How to add pivot points to your chart
- Pivot point trading strategy 1: the bounce
- Pivot point trading strategy 2: the breakout
- Bounce or breakout: how to tell the day type
- Combining pivot points with other tools
- Common pivot point mistakes
- Practise pivot point trading with Xellion
A pivot point is a price level calculated from the previous period's high, low and close. Traders use pivot points to mark likely support and resistance for the day ahead before the market even opens. Because every trader using the same formula gets the same levels, pivot point trading is popular with intraday forex and gold traders who want objective levels instead of lines drawn by eye.
This guide explains how pivot points are calculated, the main types (standard, Fibonacci, Camarilla and Woodie), how to work them out with a simple pivot point calculator, how to add them to your chart, and two common ways to trade them: bounces and breakouts. The examples use example prices on EUR/USD and gold, and you can practise them on a free demo account. One honest point first: pivot points are only levels. Price does not have to respect them, and on strong trend days it often runs straight through several.
What is a pivot point?
The main pivot point (P) is the average of the previous period's high, low and close. Around it, the formula creates resistance levels above (R1, R2, R3) and support levels below (S1, S2, S3).
| Level | Meaning | How traders read it |
|---|---|---|
| R3 | Third resistance | Extreme level; reached on strong trend days |
| R2 | Second resistance | Often the high of a strong up day |
| R1 | First resistance | First upside target or turning point |
| P | Main pivot point | The day's "balance" level |
| S1 | First support | First downside target or turning point |
| S2 | Second support | Often the low of a strong down day |
| S3 | Third support | Extreme level; reached on strong trend days |
A simple rule of thumb: if price trades above the daily pivot, many traders lean bullish for the session. If it trades below, they lean bearish. The levels above and below then act as targets or turning points, just like any other support and resistance level.
Which period's data do you use?
Most traders use daily pivots, calculated from the previous day's high, low and close. Weekly pivots (from the previous week) suit swing traders, and monthly pivots suit position traders.
For forex, the trading day usually ends at 5:00 pm New York time. In winter, that is about 3:30 am IST, so the new daily pivot points are fixed from that time. If your chart's daily candles close at a different time, your levels can differ slightly from other traders' levels. Our forex market timings in IST guide explains the daily session cycle.
A simple daily routine for Indian traders
Because the levels are fixed overnight, you can prepare them before your trading day starts:
- Morning: note the previous day's high, low and close, calculate P, R1, S1, R2 and S2, and draw them on the chart.
- Before the London open (about 1:30 pm IST): check where price sits relative to the daily pivot. Above it suggests a bullish lean; below it suggests a bearish lean.
- During the London–New York overlap (about 6:30 pm – 9:30 pm IST in winter): watch how price behaves at R1 and S1 – this is when most breaks and bounces happen.
- After the session: write down which levels held and which broke. Over a few weeks, this shows how your pairs behave around pivot points.
Pivot point formulas
Standard (floor) pivot points
The standard formula is the most widely used:
- P = (High + Low + Close) ÷ 3
- R1 = (2 × P) – Low
- S1 = (2 × P) – High
- R2 = P + (High – Low)
- S2 = P – (High – Low)
- R3 = High + 2 × (P – Low)
- S3 = Low – 2 × (High – P)
Fibonacci pivot point
The Fibonacci pivot point uses the same P, then adds or subtracts Fibonacci ratios of the previous day's range:
- R1 / S1 = P ± 0.382 × (High – Low)
- R2 / S2 = P ± 0.618 × (High – Low)
- R3 / S3 = P ± 1.000 × (High – Low)
Traders who already use Fibonacci retracement levels often like this version.
Camarilla pivot point
The Camarilla pivot point focuses on the previous close and produces tighter levels. The most-watched levels are R3/S3 and R4/S4:
- R3 / S3 = Close ± (High – Low) × 1.1 ÷ 4
- R4 / S4 = Close ± (High – Low) × 1.1 ÷ 2
Many Camarilla traders look for reversals at R3 and S3, and breakouts beyond R4 and S4.
Woodie pivot
The Woodie pivot gives extra weight to the close:
- P = (High + Low + 2 × Close) ÷ 4
- R1, S1, R2 and S2 then use the same formulas as the standard method.
Which type should you use?
| Type | Main feature | Levels | Often used for |
|---|---|---|---|
| Standard | Equal weight to high, low, close | Wider | General intraday levels |
| Fibonacci | Fibonacci ratios of the range | Medium | Traders who use Fibonacci tools |
| Camarilla | Based on the close, tight bands | Tight | Range trading and quick reversals |
| Woodie | Extra weight on the close | Similar to standard | Traders who see the close as most important |
No type is "best". The standard daily pivot is the most widely watched, which is one reason many traders start there.
Pivot point calculator: worked example on EUR/USD
All prices are example prices. Say EUR/USD's previous day had:
- High: 1.1580
- Low: 1.1490
- Close: 1.1550
- Range (High – Low): 90 pips
Standard pivot points:
| Level | Calculation | Result |
|---|---|---|
| P | (1.1580 + 1.1490 + 1.1550) ÷ 3 | 1.1540 |
| R1 | (2 × 1.1540) – 1.1490 | 1.1590 |
| S1 | (2 × 1.1540) – 1.1580 | 1.1500 |
| R2 | 1.1540 + 0.0090 | 1.1630 |
| S2 | 1.1540 – 0.0090 | 1.1450 |
| R3 | 1.1580 + 2 × (1.1540 – 1.1490) | 1.1680 |
| S3 | 1.1490 – 2 × (1.1580 – 1.1540) | 1.1410 |
Fibonacci pivot point levels (same day): R1 1.1574, R2 1.1596, R3 1.1630, S1 1.1506, S2 1.1484, S3 1.1450.
Camarilla pivot point levels (same day): R3 1.1575, R4 1.1600, S3 1.1525, S4 1.1500 (rounded).
You can do this in a spreadsheet as your own pivot point calculator: put the high, low and close in three cells and copy the formulas above. It takes a minute each morning and helps you understand where the levels come from.
How to add pivot points to your chart
There are two easy ways:
- Draw them by hand. Calculate the levels and add horizontal lines in MetaTrader 5 (Insert, then Objects, then Lines, then Horizontal Line). Label each line so you know which is P, R1 or S1.
- Use a pivot point indicator. Many custom pivot point indicators for MT5 draw daily, weekly and monthly levels automatically. If you use one, check which formula it uses and which daily close time it is based on, so your levels match what you expect.
Our MT5 setup guide covers adding objects and indicators to a chart.
Pivot point trading strategy 1: the bounce
On calm or range days, price often turns at R1 or S1.
Steps:
- Note whether price opened above or below the daily pivot.
- Wait for price to reach S1 (for a buy) or R1 (for a sell).
- Look for a rejection candle at the level, such as a pin bar or engulfing candle. See the candlestick patterns guide.
- Enter after the candle closes.
- Place the stop-loss level beyond the level and the candle's wick.
- Target the main pivot point first, then the opposite level.
Example (EUR/USD, M15): using the levels above, price drops to 1.1502 at 2:00 pm IST, just after the London open. A bullish pin bar closes at 1.1512 on S1 (1.1500). A buy at 1.1513, a stop-loss level at 1.1490 (23 pips, below the previous day's low) and a first target at the pivot, 1.1540 (27 pips), gives about 1.2:1. Some traders hold part of the trade for R1 at 1.1590.
Pivot point trading strategy 2: the breakout
On trend days, price breaks through pivot levels and uses them as stepping stones.
Steps:
- Wait for a candle close beyond R1 (bullish) or S1 (bearish).
- Look for a retest of the broken level, which now acts as support or resistance.
- Enter on a rejection candle at the retest.
- Place the stop-loss level back on the other side of the level.
- Target R2 (or S2).
Example (gold, H1): the previous day had a high of $4,120, a low of $4,060 and a close of $4,105.
| Level | Calculation | Result |
|---|---|---|
| P | ($4,120 + $4,060 + $4,105) ÷ 3 | $4,095 |
| R1 | (2 × $4,095) – $4,060 | $4,130 |
| S1 | (2 × $4,095) – $4,120 | $4,070 |
| R2 | $4,095 + $60 | $4,155 |
| S2 | $4,095 – $60 | $4,035 |
At 7:30 pm IST, during the London–New York overlap, an H1 candle closes at $4,136, above R1. Price retests $4,131 an hour later and closes bullish at $4,138. A buy at $4,138, a stop-loss level at $4,124 ($14, back below R1) and a target at R2, $4,155 ($17), gives about 1.2:1. At 0.01 lot of gold (1 ounce), each $1 move is worth about $1, so the planned loss is about $14 before costs. The lot size and pip calculator guide shows how to adjust size for wider stops.
Bounce or breakout: how to tell the day type
| Clue | Range day (bounce) | Trend day (breakout) |
|---|---|---|
| Opening position | Near the pivot | Gaps or moves away from the pivot early |
| Previous day's range | Wide (market may rest) | Narrow (pressure may build) |
| News | Quiet calendar | Major data due, such as US NFP or CPI |
| First reaction at R1/S1 | Clear rejection | Close through the level |
US data releases are usually at 7:00 pm IST in winter. On those days, pivot levels can be broken in seconds, so many traders wait until after the release.
Combining pivot points with other tools
Pivot points work best when they line up with other evidence:
- Horizontal levels and round numbers – a daily pivot level that matches a previous swing high or a round number such as 1.1500 creates a strong zone.
- Trendlines and chart patterns – a pivot level that coincides with a neckline or trendline; see our guide to forex chart patterns and the head and shoulders pattern.
- Price action – rejection or breakout candles at the level; see the price action trading guide.
- Weekly pivots – when a daily level sits near a weekly level, the area tends to attract more attention.
For more ways to build a chart routine, see technical analysis in forex.
Common pivot point mistakes
| Mistake | What happens | Better approach |
|---|---|---|
| Treating every level as a certain turn | Trades against strong trends fail | Read the day type first |
| Using the wrong daily close | Levels differ from what other traders see | Check your chart's daily candle time |
| Too many levels on the chart | Confusion and late decisions | Start with P, R1, S1, R2, S2 |
| Trading straight into news | Spikes through several levels | Wait for the release to pass |
| Stops exactly on the level | Normal wicks hit the stop | Add a buffer beyond the level |
Practise pivot point trading with Xellion
You can mark pivot levels and test bounce and breakout entries on MetaTrader 5 (server Xellion-Live), the Xellion app for iOS and Android, or WebTrader – see the platforms page. A free demo account gives you live prices with no real money, so you can track how often price reacts at P, R1 and S1 on the pairs you trade.
When you are ready to go live:
- Choose an account on the accounts page: Standard (minimum first deposit $50), Raw (minimum $250) or Zero (minimum $750).
- Fund it on the funding page: UPI deposits are instant, from $50.
- Size from the stop-loss level. Leverage goes up to 1:2000, which lowers the margin needed, but your lot size decides what each pip is worth.
CFDs are complex instruments and carry a high risk of losing money. Not investment advice.
What is a pivot point in trading?
A pivot point is a level calculated from the previous period's high, low and close. The main pivot (P) is their average, and support (S1–S3) and resistance (R1–R3) levels are calculated around it.
How do you calculate pivot points?
For standard pivot points, P = (High + Low + Close) ÷ 3, R1 = 2P – Low, S1 = 2P – High, R2 = P + (High – Low) and S2 = P – (High – Low), using the previous day's prices.
What is the difference between Camarilla and standard pivot points?
Standard pivot points use the average of the high, low and close and give wider levels. The Camarilla pivot point is based on the previous close and the range, giving tighter levels that many traders use for quick reversals at R3/S3.
What time are daily pivot points calculated in India?
Most forex platforms use the 5:00 pm New York close, which is about 3:30 am IST in winter. Levels are fixed from that point for the new trading day.
Do I need a pivot point indicator?
No. You can calculate the levels by hand or in a spreadsheet and draw horizontal lines. An indicator saves time, but check which formula and close time it uses.
Which pivot point type is best?
None is best for everyone. Standard daily pivots are the most widely watched, Fibonacci pivots suit Fibonacci users, and Camarilla pivots suit range traders.
Can I practise pivot point trading for free?
Yes. A free demo account on MT5, the Xellion app or WebTrader lets you mark pivot levels and test trades with live prices and no real money.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.



