On this page
- What are supply and demand zones?
- Supply and demand zones vs support and resistance
- The four supply and demand zone patterns
- Demand zones
- Supply zones
- How to draw a supply and demand zone on MT5
- How wide should a zone be?
- How to judge the strength of a zone
- Fresh zones vs tested zones
- Higher timeframe zones
- Supply and demand trading strategy: three entry methods
- Stop-loss and targets
- Example 1: EUR/USD demand zone (H4)
- Example 2: gold supply zone (H1)
- Example 3: GBP/USD continuation supply zone (D1 to H4)
- Supply and demand zones with other tools
- Best timeframes and sessions for supply and demand trading
- Common supply and demand trading mistakes
- Practise supply and demand zones with Xellion
Supply and demand zones trading is built on a simple idea: price moves fast when buyers and sellers are out of balance, and it often comes back to the area where that imbalance started. A demand zone is an area where buyers overwhelmed sellers and pushed price up sharply. A supply zone is an area where sellers overwhelmed buyers and pushed price down sharply. Traders mark these areas on the chart and wait for price to return to them.
If you already use support and resistance, supply and demand zones will feel familiar. The difference is that a zone is drawn around the base where a strong move started, not around a line that price touched many times. This guide explains what supply and demand zones are, the four zone patterns, how to draw a supply and demand zone on MT5, how to judge zone strength, and three trade examples on forex and gold. All prices in this article are example prices.
What are supply and demand zones?
In any market, price is set by orders. When there are many more buy orders than sell orders at a price, price has to rise until enough sellers appear. When large buy or sell interest is not completely filled in one go, some of it may remain at that price area. When price returns, those remaining orders can be triggered again and push price away a second time.
That is the logic behind a supply and demand zone:
| Zone | What happened there | What traders expect on a return |
|---|---|---|
| Demand zone | Price paused, then rallied strongly | Buyers may step in again; possible bounce up |
| Supply zone | Price paused, then dropped strongly | Sellers may step in again; possible drop |
No one can see all the orders in the forex market, so zones are an estimate based on price behaviour: areas of interest, not guarantees.
Supply and demand zones vs support and resistance
The two approaches overlap, but they look at the chart differently.
| Point | Support and resistance | Supply and demand zones |
|---|---|---|
| What is drawn | A line or narrow band at a repeated turning point | A zone around the base before a strong move |
| Strength comes from | Number of touches | Speed of the move away and freshness |
| Effect of more touches | Often seen as stronger | Often seen as weaker (orders used up) |
| Typical entry | At or after a reaction at the line | At the zone, often on the first return |
The biggest difference is how traders treat repeated tests. In support and resistance trading, a level touched four times is often seen as important. In supply and demand trading, each touch is thought to absorb some of the waiting orders, so a zone that has been tested several times is usually treated as weaker.
The four supply and demand zone patterns
Every zone has three parts: the move into the zone (the leg in), a pause (the base) and the strong move out (the leg out). The base is usually one to six small candles. Combining the leg in and leg out gives four patterns.
Demand zones
- Drop-base-rally (DBR): price falls, pauses in a small base, then rallies strongly. This is a reversal demand zone.
- Rally-base-rally (RBR): price rises, pauses, then rallies strongly again. This is a continuation demand zone.
Supply zones
- Rally-base-drop (RBD): price rises, pauses, then drops strongly. This is a reversal supply zone.
- Drop-base-drop (DBD): price falls, pauses, then drops strongly again. This is a continuation supply zone.
| Pattern | Type | Market context |
|---|---|---|
| Drop-base-rally | Demand | Bottom of a move; possible reversal up |
| Rally-base-rally | Demand | Uptrend continuation |
| Rally-base-drop | Supply | Top of a move; possible reversal down |
| Drop-base-drop | Supply | Downtrend continuation |
Continuation zones (RBR and DBD) trade in the direction of the trend, which many traders find easier. Reversal zones (DBR and RBD) can give better prices but go against the move that came before.
How to draw a supply and demand zone on MT5
You do not need a special indicator. The Rectangle tool in MetaTrader 5 is enough. If you are new to the platform, start with our MT5 download, login and setup guide.
- Pick a timeframe. Start on H4 or D1 to find the main zones, then move to H1 for detail.
- Find a strong move. Look for two or more large-bodied candles moving in one direction, ideally leaving a clear gap from where price was. Big, fast candles are the signature of an imbalance.
- Find the base. Look at the small candles just before the strong move. That cluster is the base.
- Draw the zone. For a demand zone, the bottom edge goes at the lowest wick of the base and the top edge at the highest candle body in the base. For a supply zone, the top edge goes at the highest wick of the base and the bottom edge at the lowest candle body.
- Extend it to the right. In MT5, select Insert → Objects → Shapes → Rectangle (or the rectangle icon on the toolbar), draw the box, then double-click it and tick "Ray right" if your build offers it, or simply drag the right edge forward.
- Label it. Name the object, for example "D1 demand fresh", so you can track it.
How wide should a zone be?
A zone that is too wide gives a poor entry and a large stop. A zone that is too thin may be missed by a few pips. A practical rule: if the zone is wider than about one daily average true range, refine it on a lower timeframe by looking for the base inside the base.
How to judge the strength of a zone
Not every base is worth trading. Many supply and demand traders score zones on a few points before taking a trade.
| Factor | Stronger zone | Weaker zone |
|---|---|---|
| Leg out | Large candles, fast move, little overlap | Slow, overlapping candles |
| Time in base | Short (1–3 candles) | Long, choppy base |
| Freshness | Never revisited (fresh zone) | Tested two or more times |
| Trend | In the direction of the higher timeframe trend | Against the trend |
| Room to move | Clear space to the next opposing zone | Opposing zone close by |
| Break of structure | Leg out broke a prior swing high or low | No structure broken |
Fresh zones vs tested zones
A fresh zone is one price has not returned to since the zone formed. Many traders only trade fresh zones or zones tested once, because they assume most of the waiting orders are still there. After two or three tests, the zone is often treated as used and removed from the chart.
Higher timeframe zones
A D1 demand zone usually carries more weight than an M15 demand zone, because more volume built it. A common approach is to find zones on D1 or H4, then use H1 to time the entry inside the zone.
Supply and demand trading strategy: three entry methods
Once you have a zone, there are three common ways to enter.
| Entry method | How it works | Pros | Cons |
|---|---|---|---|
| Set and forget | Pending limit order at the proximal line, stop beyond the distal line | Catches fast reactions | No confirmation; more stopped trades |
| Confirmation candle | Wait for a rejection candle inside the zone, enter on close | Fewer false entries | Worse price; some trades missed |
| Lower timeframe shift | Drop to a lower timeframe and wait for a small break of structure in your direction | Tighter stop | Needs more screen time |
For confirmation, many traders use candlestick patterns such as a pin bar, bullish or bearish engulfing candle, or a morning or evening star. You can read more about these setups in our price action trading guide.
Stop-loss and targets
- Stop-loss level: a few pips beyond the distal line (below a demand zone, above a supply zone). Add a small buffer for spread, especially on gold.
- First target: the nearest opposing zone or swing point.
- Risk-to-reward: many traders only take a zone trade if the first target is at least twice the stop distance.
Always size the position from your stop distance, so that the planned loss stays within the amount you have decided you can afford to lose on one trade.
Example 1: EUR/USD demand zone (H4)
All prices are example prices.
- On the H4 chart, EUR/USD falls to 1.1540, forms a three-candle base between 1.1538 and 1.1556, then rallies in four large candles to 1.1660, breaking the previous swing high at 1.1625. This is a drop-base-rally demand zone.
- Zone: proximal line 1.1556 (highest body in the base), distal line 1.1538 (lowest wick).
- Several days later, price returns to the zone for the first time. On H1, a bullish engulfing candle closes at 1.1561.
| Item | Level | Calculation |
|---|---|---|
| Entry | 1.1561 | Close of the H1 engulfing candle |
| Stop-loss level | 1.1530 | 8 pips below the distal line |
| Planned loss | 31 pips | 1.1561 – 1.1530 |
| Target | 1.1625 | Prior swing high, about 2 × stop distance |
This zone ticked most boxes: a fast leg out, a short base, a break of structure and a fresh first test.
Example 2: gold supply zone (H1)
All prices are example prices.
- Gold (XAU/USD) rallies to $4,072 during the London session, pauses for two candles between $4,064 and $4,072, then drops $45 in three candles. This is a rally-base-drop supply zone.
- Zone: proximal line $4,064, distal line $4,072.
- During the New York session, around 7:30 pm IST in winter, price returns to $4,064 and prints a bearish pin bar that closes at $4,060.
| Item | Level | Calculation |
|---|---|---|
| Entry | $4,060 | Close of the pin bar |
| Stop-loss level | $4,076 | $4 above the distal line |
| Planned loss per ounce | $16 | $4,076 – $4,060 |
| Target | $4,028 | Next demand zone, 2 × stop distance |
On most MT5 accounts, 1 lot of gold is 100 ounces, so at 0.01 lot each $1 move is worth about $1. A $16 stop at 0.01 lot is a planned loss of about $16, before costs.
Example 3: GBP/USD continuation supply zone (D1 to H4)
All prices are example prices.
- GBP/USD is in a daily downtrend, making lower highs and lower lows. After a drop to 1.3080, it forms a small D1 base between 1.3080 and 1.3110, then falls again to 1.2960. This is a drop-base-drop supply zone.
- Price pulls back up into the zone. On H4, it breaks a minor swing low at 1.3085 after touching 1.3104, a lower timeframe shift in the direction of the trend.
- Entry on the H4 close at 1.3080, stop at 1.3125 (above the distal line), target 1.2990 near the recent low.
Continuation zones like this one tend to work best when the higher timeframe trend is clear. If you trade trends, combine zones with moving average trading: a 50 or 200-period moving average sloping down adds weight to a supply zone.
Supply and demand zones with other tools
Supply and demand zones fit well with other approaches:
- Smart money concepts: order blocks in SMC are closely related to supply and demand bases. See our guide to smart money concept trading.
- Trend indicators: use the Supertrend indicator or the Parabolic SAR indicator to confirm the trend direction before choosing which zones to trade.
- Support and resistance: a zone that lines up with a major support and resistance level, or with a round number, often gets more attention.
Best timeframes and sessions for supply and demand trading
| Timeframe | Use |
|---|---|
| Weekly and D1 | Major zones; the big picture |
| H4 | Main trading zones for swing trades |
| H1 | Entry timing and refined zones |
| M15 | Lower timeframe confirmation only |
Zones on very low timeframes form and break constantly. Scalping is not permitted at Xellion, so work from M15 and higher.
Timing matters too. Strong legs out often form around the London open (about 1:30 pm IST in winter) and during the London–New York overlap (roughly 6:30 pm to 9:30 pm IST in winter). Major news can blow straight through a zone, so check the economic calendar before placing a pending order at a zone.
Common supply and demand trading mistakes
| Mistake | What happens | Better approach |
|---|---|---|
| Drawing zones on every small pause | Chart full of weak zones | Only mark bases followed by strong, fast moves |
| Trading zones tested many times | Orders are used up; zone breaks | Prefer fresh or once-tested zones |
| Trading against the higher timeframe trend | Zone gives a small bounce, then fails | Favour zones in the direction of the D1 trend |
| Stop exactly at the zone edge | Stopped by a wick or spread | Add a small buffer beyond the distal line |
| Ignoring the opposing zone | Target is unrealistic | Target the next opposing zone |
| Entering before news | Zone is ignored on the spike | Wait until after major releases |
Practise supply and demand zones with Xellion
You can draw and test supply and demand zones on MetaTrader 5, follow your trades on the Xellion app for iOS and Android, or use WebTrader in your browser. A free demo account lets you mark zones, place pending orders and review results with live prices and no real money.
When you are ready to go live:
- Choose an account on the accounts page: Standard (minimum first deposit $50), Raw ($250) or Zero ($750).
- Fund it on the funding page: UPI deposits are instant from $50 for clients in India, bank transfer from $100 and crypto from $10.
- Mark your zones first. Score each zone, plan the entry, stop-loss level and target, then size the trade from the stop distance.
CFDs are complex instruments and carry a high risk of losing money. Not investment advice.
What are supply and demand zones in trading?
Supply and demand zones are price areas where a strong imbalance between buyers and sellers started a sharp move. A demand zone sits below price where buyers took control; a supply zone sits above price where sellers took control.
How do you identify a supply and demand zone?
Look for a strong, fast move made of large candles, then mark the small base of candles just before it. Draw the zone from the base's wick extreme to its candle bodies and extend it to the right.
What is the difference between supply and demand zones and support and resistance?
Support and resistance focuses on levels touched many times. Supply and demand zones focus on where strong moves started, and repeated tests usually make a zone weaker rather than stronger.
What is a fresh supply and demand zone?
A fresh zone is one that price has not returned to since it formed. Many traders prefer fresh zones because they assume more unfilled orders remain there.
Which timeframe is best for supply and demand trading?
Many traders find main zones on H4 or D1 and use H1 to time entries. Lower timeframes produce many small zones that break easily.
Do I need an indicator for supply and demand zones on MT5?
No. You can draw zones with the Rectangle tool in MT5. Custom zone indicators exist, but they are not standard MT5 tools and still need your judgement.
Do supply and demand zones work on gold?
Yes. The same patterns form on gold (XAU/USD). Gold moves in larger dollar amounts, so allow a slightly wider stop buffer beyond the zone.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.



