On this page
- What is the Parabolic SAR indicator?
- How the Parabolic SAR is calculated
- The key inputs
- The formula
- Worked example
- Parabolic SAR settings on MT5
- Choosing Parabolic SAR settings
- How to read the Parabolic SAR
- Parabolic SAR strategy 1: PSAR flips with an ADX filter
- Rules for a buy
- Example: EUR/USD (H4)
- Parabolic SAR strategy 2: moving average trend filter
- Example: gold (H1)
- Parabolic SAR strategy 3: PSAR as a trailing stop only
- Parabolic SAR with other tools
- Parabolic SAR vs Supertrend
- Best timeframes for the Parabolic SAR
- Common Parabolic SAR mistakes
- Practise the Parabolic SAR indicator with Xellion
The Parabolic SAR indicator puts a series of dots on your chart. When the dots are below price, the trend is up. When they are above price, the trend is down. When price touches the dots, they jump to the other side, and the trend is treated as reversed. SAR stands for "stop and reverse", which describes exactly how the original system was meant to be traded.
Many traders use the Parabolic SAR (often shortened to PSAR) not for entries but as a trailing stop that tightens as a trend matures. This guide explains what the Parabolic SAR indicator is, how it is calculated, the MT5 Parabolic SAR settings, how to read the dots, and three Parabolic SAR strategy examples on forex and gold. All prices in this article are example prices.
What is the Parabolic SAR indicator?
The Parabolic SAR was developed by J. Welles Wilder and published in 1978 in "New Concepts in Technical Trading Systems", the same book that introduced the RSI, the average true range and the ADX indicator. Wilder designed it as a complete trend-following system that is always in the market: long or short.
The name describes how it behaves:
- Parabolic: as a trend continues, the dots accelerate towards price, forming a curve that looks like a parabola.
- Stop and reverse: the dot level is the stop for the current position. When price hits it, the original system closes the position and opens one in the opposite direction.
| PSAR state | Dot position | Meaning |
|---|---|---|
| Uptrend | Dots below price | Buyers in control; dots act as a rising stop |
| Downtrend | Dots above price | Sellers in control; dots act as a falling stop |
| Flip up | Dots jump from above to below | Possible start of an uptrend |
| Flip down | Dots jump from below to above | Possible start of a downtrend |
How the Parabolic SAR is calculated
MT5 calculates PSAR for you, but the formula explains why the dots behave the way they do.
The key inputs
- EP (extreme point): the highest high of the current uptrend, or the lowest low of the current downtrend.
- AF (acceleration factor): starts at 0.02 and rises by 0.02 each time a new extreme point is made, up to a maximum of 0.20.
The formula
For each new candle:
Next SAR = current SAR + AF × (EP − current SAR)
In words, the SAR moves a fraction (the AF) of the distance between itself and the extreme point. Early in a trend, AF is small, so the SAR moves slowly and gives the trade room. As the trend makes new highs or lows, AF rises, so the SAR closes in on price faster.
Two extra rules apply:
- In an uptrend, the SAR cannot be placed above the lows of the last two candles. In a downtrend, it cannot be placed below the highs of the last two candles.
- When price crosses the SAR, the trend flips. The new SAR starts at the previous extreme point, and AF resets to 0.02.
Worked example
All figures are example figures. EUR/USD is in an uptrend on H4.
| Candle | Current SAR | EP (highest high) | AF | Next SAR calculation | Next SAR |
|---|---|---|---|---|---|
| 1 | 1.1550 | 1.1620 | 0.02 | 1.1550 + 0.02 × (1.1620 − 1.1550) | 1.1551 |
| 2 (new high 1.1640) | 1.1551 | 1.1640 | 0.04 | 1.1551 + 0.04 × (1.1640 − 1.1551) | 1.1555 |
| 3 (new high 1.1665) | 1.1555 | 1.1665 | 0.06 | 1.1555 + 0.06 × (1.1665 − 1.1555) | 1.1562 |
Each new high raises AF, so the SAR rises faster: 1 pip, then 4 pips, then 7 pips. After several more new highs, AF reaches 0.20 and the SAR follows price closely.
Parabolic SAR settings on MT5
Parabolic SAR is a standard indicator in MetaTrader 5, so there is nothing to download.
- Open MT5 and log in. New to the platform? See our MT5 download, login and setup guide.
- Open a chart, for example EUR/USD on H4.
- Go to Insert → Indicators → Trend → Parabolic SAR. On the mobile app, tap the indicator (f) icon and choose Parabolic SAR.
- Keep Step at 0.02 and Maximum at 0.2, then click OK.
- The dots appear directly on the price chart. You can change their colour in the Colors tab.
- Save the chart as a template.
Choosing Parabolic SAR settings
| Settings (step / maximum) | Effect | Typical use |
|---|---|---|
| 0.01 / 0.1 | Slower dots, fewer flips, wider stop | Swing trading, volatile markets such as gold |
| 0.02 / 0.2 | Wilder's default, balanced | Most traders, most timeframes |
| 0.03–0.04 / 0.2–0.3 | Faster dots, more flips, tighter stop | Short intraday trends, more noise |
- A smaller step makes the SAR slower and less sensitive. You stay in trends longer but give back more profit at the end.
- A larger step makes the SAR react faster. Exits are tighter, but you get stopped out more often on normal pullbacks.
- The maximum caps how close the SAR can get. A lower maximum stops the dots from hugging price too tightly late in a trend.
Start with 0.02 and 0.2. If the dots flip constantly on your chart, try 0.01 and 0.1 and compare the results on a demo account.
How to read the Parabolic SAR
- Dots below price: uptrend. Look for buys, or hold existing buys.
- Dots above price: downtrend. Look for sells, or hold existing sells.
- Gap between dots and price widening: the trend is moving away strongly.
- Dots closing in on price: the trend is ageing or slowing, and a flip may be near.
- Many flips in a short time: the market is ranging. PSAR signals are less reliable.
The biggest limitation is that the PSAR is always in the market. In a range, it keeps flipping and producing losing signals. That is why most traders combine it with a trend filter.
Parabolic SAR strategy 1: PSAR flips with an ADX filter
Wilder intended the ADX and Parabolic SAR to be used together. ADX tells you whether there is a trend; PSAR tells you when to enter and exit.
Rules for a buy
- ADX is above 25 and rising, and +DI is above -DI. See the ADX indicator guide.
- PSAR dots flip from above price to below price.
- Enter on the close of the flip candle.
- Place the stop-loss level at the first PSAR dot below price, or just beyond it.
- Move the stop to each new dot as it rises. Exit when price closes below the dots.
Reverse the rules for a sell.
Example: EUR/USD (H4)
All prices are example prices.
- ADX on EUR/USD H4 rises from 22 to 28, with +DI above -DI.
- An H4 candle closes at 1.1628, and the PSAR dots flip below price. The first dot is at 1.1584.
| Item | Level | Calculation |
|---|---|---|
| Entry | 1.1628 | Close of the flip candle |
| Stop-loss level | 1.1580 | Just below the first dot at 1.1584 |
| Planned loss | 48 pips | 1.1628 – 1.1580 |
| Exit | Trailing | Stop moves up with each new dot |
Over the next eight H4 candles, EUR/USD climbs to 1.1715 and the dots rise to 1.1682. When a candle closes below 1.1682, the trade exits there, well above the entry. Earlier flips while ADX was below 20 would have been skipped.
Parabolic SAR strategy 2: moving average trend filter
A simpler filter uses a moving average.
- Price is above the 50 or 200-period moving average: only take buy flips.
- Price is below the moving average: only take sell flips.
- Exit on the next flip against you.
Example: gold (H1)
All prices are example prices.
- Gold (XAU/USD) on H1 is below its 200-period moving average.
- During the London–New York overlap, around 7:00 pm IST in winter, the dots flip above price on a candle closing at $4,038. The first dot is at $4,053.
| Item | Level | Calculation |
|---|---|---|
| Entry | $4,038 | Close of the flip candle |
| Stop-loss level | $4,056 | $3 above the first dot at $4,053 |
| Planned loss per ounce | $18 | $4,056 – $4,038 |
| Exit | Trailing | Stop moves down with each new dot |
On most MT5 accounts, 1 lot of gold is 100 ounces, so at 0.01 lot each $1 move is worth about $1. An $18 stop at 0.01 lot is a planned loss of about $18, before costs.
Parabolic SAR strategy 3: PSAR as a trailing stop only
Many traders ignore PSAR entries completely and use the dots only to manage trades found another way.
- Enter using your own method, for example a breakout, a reaction at support and resistance, a supply and demand zone or a candlestick pattern.
- Once the PSAR dots are on the correct side of price, move your stop-loss level to the latest dot after each candle closes.
- Never move the stop backwards.
- Exit when price closes through the dots.
Because the acceleration factor increases with each new high or low, the PSAR trailing stop starts loose and tightens as the trend extends. This suits traders who want to give a new trade room but protect more of the open profit as the move grows.
| Trend stage | AF | PSAR behaviour |
|---|---|---|
| Early | 0.02–0.06 | Dots far from price; room for pullbacks |
| Middle | 0.08–0.14 | Dots rising or falling faster |
| Late | 0.16–0.20 | Dots close to price; tight exit |
Parabolic SAR with other tools
- Price action: a PSAR flip that coincides with a break of a swing high or low is stronger than a flip in the middle of nowhere. See price action trading.
- Smart money concepts: some SMC traders use PSAR on the higher timeframe as a simple bias filter. Read smart money concept trading.
- Supertrend: Supertrend is another trailing-stop style indicator, based on ATR. It is not built into MT5 and has to be added as a custom indicator; see the Supertrend indicator guide.
Parabolic SAR vs Supertrend
| Point | Parabolic SAR | Supertrend |
|---|---|---|
| Standard in MT5 | Yes | No (custom only) |
| Based on | Extreme points and acceleration | ATR (volatility) |
| Display | Dots above or below price | Single line that changes colour |
| Stop behaviour | Tightens as the trend ages | Distance follows volatility |
| Main weakness | Flips often in ranges | Whipsaws in ranges |
Best timeframes for the Parabolic SAR
| Timeframe | How PSAR behaves |
|---|---|
| D1 and H4 | Clearer trends; fewer flips |
| H1 | Good for intraday trends in the London and New York sessions |
| M15 | Usable with a filter; more flips |
| M1 and M5 | Constant flipping; mostly noise |
Scalping is not permitted at Xellion, so use the Parabolic SAR on M15 and higher timeframes. Trends often start after the London open (about 1:30 pm IST in winter) and during the London–New York overlap (roughly 6:30 pm to 9:30 pm IST in winter). News releases can flip the dots on one candle and reverse straight after, so check the economic calendar before entering.
Common Parabolic SAR mistakes
| Mistake | What happens | Better approach |
|---|---|---|
| Trading every flip | Many losses in ranges | Use ADX or a moving average filter |
| Using PSAR in a sideways market | Dots flip back and forth | Check ADX; stand aside below 20 |
| Using a large step on volatile markets | Stopped out on normal pullbacks | Try 0.01 / 0.1 on gold or D1 charts |
| Moving the stop away from the dots | Larger losses than planned | Only trail in the trade's favour |
| Treating a flip as a confirmed reversal | Overconfidence | Treat it as a signal to review the trade |
Practise the Parabolic SAR indicator with Xellion
The Parabolic SAR is built into MetaTrader 5, and you can also follow your trades on the Xellion app for iOS and Android or on WebTrader. A free demo account lets you test PSAR settings, flips and trailing stops with live prices and no real money.
When you are ready to go live:
- Choose an account on the accounts page: Standard (minimum first deposit $50), Raw ($250) or Zero ($750).
- Fund it on the funding page: UPI deposits are instant from $50 for clients in India, bank transfer from $100 and crypto from $10.
- Plan your exit before you enter. Decide whether PSAR is your entry signal, your trailing stop or both, then size each trade from the stop-loss level.
CFDs are complex instruments and carry a high risk of losing money. Not investment advice.
What is the Parabolic SAR indicator?
The Parabolic SAR is a trend-following indicator that places dots below price in an uptrend and above price in a downtrend. SAR stands for stop and reverse, and the dots are often used as a trailing stop.
What are the best Parabolic SAR settings?
The default settings are a step of 0.02 and a maximum of 0.2, Wilder's original values. A smaller step such as 0.01 makes the dots slower and suits volatile markets or swing trading.
How do you read the Parabolic SAR dots?
Dots below price mean an uptrend; dots above price mean a downtrend. When price crosses the dots, they flip to the other side, signalling a possible trend change.
Is Parabolic SAR available on MT5?
Yes. Parabolic SAR is a standard MT5 indicator under Insert, Indicators, Trend, and it is also available in the MT5 mobile apps.
What is the acceleration factor in Parabolic SAR?
The acceleration factor controls how fast the dots move towards price. It starts at the step value (0.02) and increases by that amount with each new high or low, up to the maximum (0.2).
What is the best indicator to use with Parabolic SAR?
Many traders pair it with the ADX to confirm a trend is strong enough, or with a 50 or 200-period moving average to trade only in the trend direction.
Is Parabolic SAR good for gold trading?
It can be used on gold (XAU/USD) like any other market. Because gold is volatile, some traders use slower settings such as 0.01 and 0.1 to avoid frequent flips.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.



