On this page
- What is a double top pattern?
- What is a double bottom pattern?
- Double top vs double bottom at a glance
- How to identify a valid double top or double bottom
- How to trade the double top pattern
- Entry 1: Neckline close (aggressive)
- Entry 2: Neckline retest (conservative)
- Entry 3: Second-peak rejection (very aggressive)
- Stop-loss level
- How to trade the double bottom pattern
- Double top and double bottom targets
- Example 1: Double top on EUR/USD (H4)
- Example 2: Double bottom on gold (H1)
- How to avoid false double tops and bottoms
- Triple tops and bottoms
- Common double top and double bottom mistakes
- Using the pattern with other tools
- Practise double tops and bottoms with Xellion
The double top and double bottom are two of the most common reversal patterns on any chart. A double top forms when price hits the same high twice and fails to break it, making an "M" shape. A double bottom forms when price hits the same low twice and holds, making a "W" shape. Both patterns tell the same story: the trend tried twice to continue, failed twice, and may now be ready to turn.
This guide explains the double top and double bottom pattern in plain steps: how to identify each one, why the neckline matters, three ways to enter, where to place the stop-loss level, how to calculate the target, and how to tell a real pattern from a false one. The examples use example prices on EUR/USD and gold, and you can practise them on a free demo account. One honest point first: double tops and bottoms are common, and many of them never complete. The neckline break is what turns a shape into a signal.
What is a double top pattern?
A double top pattern is a bearish reversal pattern that forms after an uptrend. Because of its shape, many traders call it the M pattern.
| Part | What it is | What it tells you |
|---|---|---|
| Prior uptrend | A clear rise before the pattern | There is a trend to reverse |
| First peak | A high, followed by a pullback | Buyers are still in control |
| Valley (neckline) | The low between the two peaks | The support that must break |
| Second peak | A high at about the same level as the first | Buyers fail to make a new high |
| Breakout | A candle close below the neckline | The pattern is confirmed |
The second peak is the key moment. In a healthy uptrend, each high should be higher than the last. When price stalls at the same level twice, it shows that sellers are defending that area. The neckline break then creates the first lower low, which changes the trend structure. Our support and resistance guide explains why that structure change matters.
What is a double bottom pattern?
The double bottom pattern is the mirror image: a bullish reversal pattern that forms after a downtrend. Because of its shape, it is often called the W pattern.
- Price falls to a low (first bottom), then bounces to a high (the neckline).
- Price falls again to about the same low (second bottom), but sellers cannot push it lower.
- A candle close above the neckline confirms the double bottom chart pattern.
The double bottom shows that sellers tried twice to break support and failed. Buyers are now defending that level, and the neckline break creates the first higher high.
Double top vs double bottom at a glance
| Point | Double top (M pattern) | Double bottom (W pattern) |
|---|---|---|
| Prior trend | Uptrend | Downtrend |
| Shape | Two peaks at a similar level | Two troughs at a similar level |
| Neckline | The low between the peaks | The high between the troughs |
| Signal | Close below the neckline | Close above the neckline |
| Bias after signal | Bearish | Bullish |
| Classic stop-loss level | Above the second peak | Below the second bottom |
| Target | Neckline minus pattern height | Neckline plus pattern height |
How to identify a valid double top or double bottom
Many charts show two highs or two lows close together. Use this checklist to filter the real patterns:
- A clear prior trend. A double top needs an uptrend before it; a double bottom needs a downtrend. Two equal highs in the middle of a range mean little.
- Peaks or troughs at a similar level. They do not need to be identical. A difference of a few pips (or a few dollars on gold) is normal. A large difference changes the pattern.
- Enough space between them. The two peaks or troughs should be separated by a clear pullback, usually several candles. Two highs on back-to-back candles are not a double top.
- A meaningful valley or peak in between. The pullback between the two points should be deep enough to create a clear neckline.
- Fading momentum. Many traders look for momentum divergence – for example a lower RSI reading at the second peak of a double top, or a higher RSI reading at the second bottom of a double bottom.
- A confirmed close beyond the neckline. Until this happens, it is only a possible double top or double bottom.
The pattern can appear on any timeframe, but double tops and bottoms on H4 and daily charts are usually more reliable than those on M5 or M15.
How to trade the double top pattern
Entry 1: Neckline close (aggressive)
Sell when a candle closes below the neckline. This gives an early entry, but carries the highest chance of a false breakout.
Entry 2: Neckline retest (conservative)
After the break, price often returns to test the neckline from below. Old support becomes new resistance. A conservative trader waits for that retest and sells after a bearish rejection candle, such as a pin bar or bearish engulfing, closes under the neckline. Our candlestick patterns guide shows these signals. The retest does not always happen, so some moves will be missed.
Entry 3: Second-peak rejection (very aggressive)
Some experienced traders sell at the second peak itself, after a strong rejection candle, before the neckline breaks. This gives the best price and the tightest stop, but the pattern is not yet confirmed, so it fails more often.
Stop-loss level
- Above the second peak – the classic placement. If price breaks above both peaks, the double top is clearly wrong.
- Above the retest high – a tighter option for retest entries.
Pick the stop-loss level from the chart first, then pick the lot size so the planned loss is acceptable. The lot size and pip calculator guide shows the maths.
How to trade the double bottom pattern
The rules simply flip:
- Aggressive entry: buy when a candle closes above the neckline.
- Conservative entry: buy on a retest of the neckline from above, after a bullish rejection candle.
- Stop-loss level: below the second bottom (classic) or below the retest low (tighter).
- Target: neckline plus the height of the pattern.
Double top and double bottom targets
Both patterns use the same "measured move":
- Measure the vertical distance from the peaks (or troughs) to the neckline.
- Project that distance from the neckline in the direction of the breakout.
This gives a minimum objective many traders watch. Always check the path to the target. A previous swing point, a round number or a Fibonacci retracement level can stop price before the full target. Many traders take partial profit at the first level and leave the rest for the measured target.
Example 1: Double top on EUR/USD (H4)
All prices are example prices.
- EUR/USD rises from 1.1450 to 1.1650 over three weeks.
- First peak: 1.1690, then a pullback to 1.1580 (the neckline).
- Second peak: a rally that stalls at 1.1685. RSI reads 61 at the second peak, lower than 72 at the first.
- At 7:30 pm IST, during the London–New York overlap, an H4 candle closes at 1.1566, below the neckline.
| Item | Level | Calculation |
|---|---|---|
| Pattern height | 110 pips | 1.1690 – 1.1580 |
| Neckline | 1.1580 | Valley low |
| Measured target | 1.1470 | 1.1580 – 0.0110 |
| Stop-loss level (classic) | 1.1700 | Just above both peaks |
The classic stop is wide: about 134 pips from a 1.1566 entry. A trader could instead wait for a retest. The next day price rallies to 1.1584, prints a bearish engulfing candle and closes at 1.1570. A retest entry at 1.1570 with a stop-loss level at 1.1600 (30 pips) and a first target at 1.1510 (a previous swing low, 60 pips) gives about 2:1, with 1.1470 as a second objective.
Example 2: Double bottom on gold (H1)
- Gold falls from $4,120 to $4,030.
- First bottom: $4,010, then a bounce to $4,070 (the neckline).
- Second bottom: a drop that holds at $4,014.
- At 2:30 pm IST, after the London open, an H1 candle closes at $4,076, above the neckline.
| Item | Level | Calculation |
|---|---|---|
| Pattern height | $60 | $4,070 – $4,010 |
| Measured target | $4,130 | $4,070 + $60 |
| Stop-loss level (classic) | $4,005 | Below both bottoms |
| Stop-loss level (retest) | $4,060 | Below a retest low near the neckline |
On most MT5 accounts, 1 lot of gold is 100 ounces, so at 0.01 lot each $1 move is worth about $1. A retest entry at $4,074 with a $14 stop means a planned loss of about $14 at 0.01 lot, before costs.
How to avoid false double tops and bottoms
A double top that never breaks its neckline is just a range – and the uptrend may continue. Watch for these warning signs:
- No neckline close. Price touches the neckline, then bounces. Without a close beyond it, the pattern is not complete.
- Price closes back inside quickly. A break that reverses within one or two candles is often a false breakout.
- The second peak breaks clearly higher. If price closes well above the first peak, the double top has failed; the uptrend is continuing.
- News at the breakout. US data such as NFP or CPI, usually at 7:00 pm IST in winter, can push price through a neckline and straight back.
- Peaks too close in time. Two highs a few candles apart are often just noise.
Triple tops and bottoms
Sometimes price tests the level a third time, forming a triple top or triple bottom. The logic is the same: the neckline is the line through the lows (or highs) between the tests, and the signal is a close beyond it. A third test adds evidence, but also means the pattern takes longer to form.
Common double top and double bottom mistakes
| Mistake | What happens | Better approach |
|---|---|---|
| Selling the second peak with no plan | Price breaks higher and the stop is hit | Wait for the neckline close, or use a tight stop above the peak |
| Calling every pair of highs a double top | Many trades in random ranges | Require a clear prior trend and a meaningful neckline |
| Very short timeframes | Noise creates false M and W shapes | Focus on H4 and daily |
| Ignoring the path to target | Price stops at nearby support or resistance | Take partial profit at the first level |
| Stop too tight inside the pattern | Normal retests hit the stop | Use the second peak or the retest high |
Using the pattern with other tools
The double top and double bottom pattern works best when other evidence agrees:
- Horizontal levels – a double top at a major weekly resistance zone carries more weight.
- Trendlines – a double top that also breaks an ascending trendline gives a stronger signal.
- Momentum divergence – a weaker RSI or MACD reading at the second peak or trough.
- Price action – rejection candles at the second peak; see the price action trading guide.
- Session timing – breakouts in the London open (about 1:30 pm IST) or the London–New York overlap (6:30 pm – 9:30 pm IST in winter) tend to follow through better. See forex market timings in IST.
The double top and double bottom are close cousins of the head and shoulders pattern. For more shapes, see our guide to forex chart patterns and the wider technical analysis in forex guide.
Practise double tops and bottoms with Xellion
You can draw necklines and measure targets on MetaTrader 5 (server Xellion-Live), the Xellion app for iOS and Android, or WebTrader – see the platforms page and our MT5 setup guide. A free demo account gives you live prices with no real money, so you can see how often M and W patterns complete on the pairs you follow.
When you are ready to go live:
- Choose an account on the accounts page: Standard (minimum first deposit $50), Raw (minimum $250) or Zero (minimum $750).
- Fund it on the funding page: UPI deposits are instant, from $50.
- Size from the stop-loss level. Leverage goes up to 1:2000, which lowers the margin needed, but your lot size decides what each pip is worth.
CFDs are complex instruments and carry a high risk of losing money. Not investment advice.
What is a double top pattern?
A double top is a bearish reversal pattern with two peaks at about the same level after an uptrend. It is confirmed when price closes below the neckline, the low between the two peaks. It is often called the M pattern.
What is a double bottom pattern?
A double bottom is a bullish reversal pattern with two troughs at about the same level after a downtrend. It is confirmed when price closes above the neckline, the high between the two troughs. It is often called the W pattern.
Is a double top bullish or bearish?
A double top is bearish – it suggests an uptrend may reverse lower. A double bottom is bullish and suggests a downtrend may reverse higher.
How do you calculate the double top target?
Measure the distance from the peaks to the neckline and subtract it from the neckline. For a double bottom, add the distance from the troughs to the neckline to the neckline.
Where should the stop-loss go on a double bottom?
The classic placement is just below the second bottom. Traders who enter on a neckline retest often use a tighter stop below the retest low.
Do the two peaks need to be exactly equal?
No. Small differences are normal. What matters is that price clearly failed to push beyond the first peak or trough, and then broke the neckline.
Can I practise trading the double top and double bottom pattern for free?
Yes. A free demo account on MT5, the Xellion app or WebTrader lets you mark necklines and test entries with live prices and no real money.
This article is general information and education, not investment advice. CFDs are complex instruments and carry a high risk of losing money rapidly due to leverage.



